facebook js

Follow Planet-Soaring on Facebook

Monday, January 3, 2011

Parkzone Radian PRO overview

I got my Parkzone Radian PRO last friday. This new Radian comes with a new wing equiped with ailerons and flaps. The kit exists in 2 versions: Plug and Play, where you will need a receiver, a battery, the charger and the DSM2 transmitter, and the Bind and Fly version which comes with a a Spektrum 2.4GHz DSM2 AR600 receiver already installed, a 3S 11.1V 1300mAh Li-Po battery, and a charger.

Specs:
  • Wingspan: 2000 mm
  • Length: 1140 mm
  • Weight: 980 g
  • Motor Size: 480 Outrunner Brushless Motor 960kV
  • Prop Size: 9.75 x 7.5 Inch Folding Prop
  • Speed Control : E-Flite 30Amp Pro Switch-Mode Brushless ESC

The version I have is the BNF (Bind & Fly) version.

Key Features:

  • 5-channel control - throttle, aileron, elevator, rudder and flaps
  • Powerful 480-size 960Kv brushless outrunner motor installed
  • E-flite® Pro 30A brushless ESC installed
  • Ready to fly in minutes
  • Durable, lightweight and repairable Z-Foam™ construction
  • Spektrum 2.4GHz DSM2 AR600 receiver installed
  • 3S 11.1V 1300mAh Li-Po battery pack included
  • 2- to 3-cell DC LiPo balancing charger included





Some modifications have been done compared to the 2 axis version of the Radian. The Fuselage and the wings have been strenghtened with fiberglass rods. The joiner has the same diameter but is thicker. The wing section is thinner but have more camber.

The possibility to use reflex and camber should extend the flying domain of the plane, so this is very interesting !

As the plane is ready to fly, I'm just waiting for a correct weather window to try it. Stay tuned !

To wait, you can watch this video from Horizon Hobby GB:



No comments:

Post a Comment

Jehnedi (CZ) F3G Eurotour final contest report

Text and photos:  Sebastian Haase (German version below) In my last and first report on the new, young and upcoming FAI class F3G, Pierre an...